Install (source code)
Introduction and requirements
Here we describe the compilation and installation procedure for OpenBabel 2.3.0 or newer. For information on installing Open Babel 2.2 series, see Install Open Babel 2.2.
The following are required to compile Open Babel:
The following are optional when compiling Open Babel, but if not installed, fewer features will be available:
- libxml2 development headers are required to read/write CML files (the libxml2-dev package in Ubuntu)
- zlib.h is required to support reading gzipped files (the zlib1g-dev package in Ubuntu)
- If using GCC 3.x to compile (and not GCC 4.x), then the Boost headers are required for certain formats (CML, Chemkin, Chemdraw CDX, MDL RXN and RSMI)
- Eigen version 2 is required for some API classes (OBAlign, OBConformerSearch) and plugins (the QEq and QTPIE charge models, the conformer operation). These will not be available otherwise.
- Eigen may be available through your package manager (the libeigen2-dev package in Ubuntu). Alternatively, Eigen is available from http://eigen.tuxfamily.org. It doesn’t need to be compiled or installed. Just unzip it and specify its location when configuring cmake (see below) using -DEIGEN2_INCLUDE_DIR=whereever.
If you want to build the GUI (Graphical User Interface), you need the following:
- wxWidgets 2.8 (or newer)
- Binary packages may be available through your package manager (wx-common and wx2.8-headers on Ubuntu) or from http://www.wxwidgets.org/downloads/. Otherwise, you could try compiling it yourself from the source code.
- wxWidgets 2.8 (or newer)
If you want to use Open Babel using one of the supported language bindings, then the following notes may apply:
- You need the the Python development libraries to compile the Python bindings (package python-dev in Ubuntu)
- You need the the Perl development libraries to compile the Perl bindings (package libperl-dev in Ubuntu)
- Developer note: If you are compiling directly from the Subversion repository, then you need to create the Python/Perl bindings yourself. To do so you need to install the latest version of SWIG (at the time of writing, 2.0.1, but there may be a new version).
If you want to install globally on your system, you will need root access, and should follow these instructions. If you don't have root access or if you simply wish to install in your 'home' area, see Installing locally without root access.
Installing globally with root access
(A1) Open a command window, and decompress the downloaded file with the following command:
tar zxvf openbabel-2.3.0.tar.gz
This will create a folder called 'openbabel-2.3.0' containing the Open Babel source code.
The recommended way of building Open Babel is to use separate source and build folders. Let's call them ob-src and ob-build:
mv openbabel-2.3.0 ob-src mkdir ob-build
(A2) You now need to configure and compile openbabel. To do this, change directory into ob-src. Run the following commands, one after the other
cmake ../ob-src 2>&1 | tee cmake.out make 2>&1 | tee make.out
If there are any errors at this point, send an email to the openbabel-discuss mailing list and attach the files 'cmake.out' and 'make.out'.
If you look at the output of 'cmake' you can see whether CML and gzip support will be included in Open Babel (see Optional Libraries above).
#FIXME - INSERT EXAMPLE HERE
(A3) If you have root permissions, you can install openbabel globally. As root, run the following command:
(A4) If necessary (e.g. babel doesn't work), add the location of the installed libopenbabel.so to the LD_LIBRARY_PATH, in my case:
Installing locally without root access
If you don't have root access, you can still compile and use Open Babel.
(B1) Follow Step A1 above
(B2) Make a local directory to install everything into. In this example, I will use the folder "tree" in my home directory:
(B3) Instead of Step A2 above, use the 'prefix' option of configure as follows:
./configure --prefix=/home/noel/tree 2>&1 | tee configure.out make 2>&1 | tee make.out
(B4) You can now install without root permissions using the following command:
Note: This will take about 5 minutes, and will display a large amount of output on the screen.
This installs the babel executable (and related tools) to /home/noel/tree/bin so you need to add this directory to your PATH in your startup scripts (that is, .bashrc, or whatever):
(B5) Add the location of the installed libopenbabel.so to the LD_LIBRARY_PATH, in my case:
Compile bindings for Java, .NET, Perl, Python or Ruby
Compile the development code
For information on compiling our development code, please see the CMake page.